Pin It
Concord+ 8x8
  • Concord+ 8x8
  • Rear

NeoPro Concord+ 8x8

CODE: 80-­‐00059


Supplier: NeoPro

Concord+™ - 8x8 Component Video, Digital Audio, L+R Anlg Audio Matrix w/ Cat5 Out.


  The Concord+ is an 8 input matrix switch with 8 outputs utilizing Cat5 cables to feed high definition video, digital and analog audio. Optionally, the digital audio section can be used for switching composite video.

  The Concord+ matrix switch will transmit a 1080i/p signal over two Cat5 cables up to 1000 feet away. The Hornet™ single gang decora in wall receiver will automatically detect the cable length and use NeoPro's patented self adjusting equalizer to compensate for cable losses.


Concord+ Matrix Features

    • Component video (YPbPr)
    • Left and right analog audio
    • Volume, Bass, and Treble for each output
    • Digital audio (SPDIF coax), doubles as composite video matrix
    • Full non-blocking matrix - all outputs can display the same signal or different signals
    • Independent audio and video switching - digital and analog audio can be switched independently
    • NeoTouch™ front panel - no moving parts to jam
    • Mutliple control inputs - RS-232, USB, IR detector (front) and wired IR (rear)
    • Highly visible Vacuum Fluorescent Display (VFD)
    • 16 memories for storing and recalling switcing commands
    • Front panel lockout and blackout
    • Black rack mount kit included (silver on request)
    • Black or silver chassis with choice of black or white front panel

  • IR codes available in several formats for easy integration

Hornet Receiver Features (sold separately)

  • Single gang Decora style module
  • No local power needed - power comes from the Concord
  • Auto-adjusting equalizer for a quick and reliable installation
  • Paintable wall plate - Labels are applied after finish


  • Power Inlet: IEC 320-C14
  • Input Voltage: 90-240VAC 50-60Hz, 45W typical
  • Dimensions: Width: 17” Height: 3.45” Depth 10.5” (not including removable feet)
  • Weight: 12 lbs
  • Video bandwidth: 140MHz+ (full 1080p)
  • Analog audio bandwidth: 0 Hz to 200KHz
  • Digital audio modes: PCM, LPCM, Dolby, DTS
  • Digital audio/C-video bandwidth: 20MHz
  • RS-232: 115.2K baud, full two way protocol
  • USB: Slave device, Windows driver included, installs as virtual COM port at 115.2K baud
  • Rear IR: 3.5mm mono jack for 5V or 12V blaster input, polarity insensitive

NeoPro Component A/V Matrix Features

Yes + Tone + Vol

Datasheet (NeoPro_Concord-C-web.pdf, 568 Kb) [Download]

Installation Guide (CURRENT_CAT5_Int_Guide.pdf, 621 Kb) [Download]

Hornet Installation Guide (DOC42-00014-A_NeoPro-Hornet.pdf, 330 Kb) [Download]

Type the characters you see in the picture below.